  Rank: Advanced Member Groups: Registered
Joined: 23/03/2016(UTC) Posts: 276  Was thanked: 91 time(s) in 57 post(s)
|
Originally Posted by: uni  Originally Posted by: arielyles Not sure if this is a maple wrapper issue but thought I would start here. I'm using the new version of SMATH (6081) and Version 1.0.6067.40150 of Maple Wrapper. When I use simplify, it converts a variable with 'I' to 'i'. See attached .sm file. Notice "I.BIAS" in the input and the "i.BIAS" at the output.   example.sm (5kb) downloaded 70 time(s). Fixed and updated. Try now. Confirmed fixed. Thank you! |
|
|
|
|
|
|
Rank: Advanced Member Groups: Registered
Joined: 28/08/2014(UTC) Posts: 1,356  Was thanked: 815 time(s) in 516 post(s)
|
Hi. I found this procedure interesting. Best regards. Alvaro.  maple_2nd.sm (11kb) downloaded 58 time(s).
|
|
|
|
|
|
 Rank: Guest
Groups: Registered
Joined: 04/07/2015(UTC) Posts: 6,866  Was thanked: 981 time(s) in 809 post(s)
|
Alvaro,
A Mathcad Frobenius document was done in our times.
A "visible" document. I will look at it for Smath.
From recollection, it does not need Maple.
Jean
|
|
|
|
|
|
Rank: Advanced Member Groups: Registered
Joined: 28/08/2014(UTC) Posts: 1,356 Was thanked: 815 time(s) in 516 post(s)
|
Originally Posted by: Jean Giraud Alvaro,
A Mathcad Frobenius document was done in our times.
A "visible" document. I will look at it for Smath.
From recollection, it does not need Maple.
Jean Jean! "Our times". What's that?!. Best regards. Alvaro.
|
|
|
|
|
|
Rank: Guest
Groups: Registered
Joined: 04/07/2015(UTC) Posts: 6,866 Was thanked: 981 time(s) in 809 post(s)
|
Originally Posted by: Razonar Jean! "Our times". What's that?!.
Best regards.
Alvaro. ... at the time "you and me" were Mathsoft Collab. I confused myself with "Frobenius". I thought of the non-linear DE coefficients. In this Maple Frobenius is about some matrix "norm". Some literature refer Frobenius norm to Euclidean Euclidean norm is "norme", built-in Smath. Cheers , Jean
|
|
|
|
|
|
 Rank: Advanced Member Groups: Registered, Advanced Member Joined: 10/11/2010(UTC) Posts: 1,494   Was thanked: 1274 time(s) in 745 post(s)
|
|
Russia ☭ forever
Viacheslav N. Mezentsev |
 2 users thanked uni for this useful post.
|
on 10/09/2016(UTC), on 10/09/2016(UTC)
|
|
|
Rank: Advanced Member Groups: Registered, Advanced Member Joined: 10/11/2010(UTC) Posts: 1,494 Was thanked: 1274 time(s) in 745 post(s)
|
Originally Posted by: uni You need to manually set the rights for cmaple.exe (chmod 755 cmaple.exe). Updated. Setting permissions automated (for Linux). |
Russia ☭ forever
Viacheslav N. Mezentsev |
|
|
|
|
|
Rank: Advanced Member Groups: Registered
Joined: 23/03/2016(UTC) Posts: 276 Was thanked: 91 time(s) in 57 post(s)
|
Hello, I encountered another issue. This seemed to occur with recent update. I'm not sure if this is plugin related or PC related. However, I get this error when I try to use Maple Wrapper. Using most recent version of MapleWrapper and Smath Studio. Any help would be greatly appreciated.  |
|
|
|
|
|
|
Rank: Advanced Member Groups: Registered
Joined: 23/03/2016(UTC) Posts: 276 Was thanked: 91 time(s) in 57 post(s)
|
I did something to make the cmaple.exe become a runaway process. It was taking up ~ 1GB of memory. Not entirely sure how I did that but force closing cmaple.exe fixed this particular issue. I'll try to figure out what caused the runaway process in my sheet.
Seems like user error after all. |
|
|
|
|
|
|
Rank: Advanced Member Groups: Registered, Advanced Member Joined: 10/11/2010(UTC) Posts: 1,494 Was thanked: 1274 time(s) in 745 post(s)
|
It's a good idea to check process status. I'll try to implement this in maple() function. |
Russia ☭ forever
Viacheslav N. Mezentsev |
|
|
|
|
|
Rank: Advanced Member Groups: Registered, Advanced Member Joined: 10/11/2010(UTC) Posts: 1,494 Was thanked: 1274 time(s) in 745 post(s)
|
Also, I found an issue in maple() function. In some cases the symbolic expression could not have multiplication sign. This case is not handled. You can copy and paste this to SMath Studio: Code:solve(I.OUT_MAX*1.25≡η*1/2*N*I.PEAK_LIMIT(1-{(V.O+V.F)*N}/{V.I+(V.O+V.F)*N}),I.PEAK_LIMIT)
P.S. Hmm... this is my fault. I made a mistake when typing. Edited by user 19 September 2016 19:44:57(UTC)
| Reason: Not specified |
Russia ☭ forever
Viacheslav N. Mezentsev |
|
|
|
|
|
 Rank: Advanced Member Groups: Registered
Joined: 22/02/2014(UTC)
Posts: 81
Was thanked: 11 time(s) in 10 post(s)
|
Hi Uni, I try my "example_that_works_in_5973.sm" time to time with new revisions of Smath. Recently, behaviour changed again, this time returning vector of zeros(in 6103), instead of error messages(in 6096).   Is it possible to pass the nd[1] to maple() in a way how Smath displays it on the screen ? In this case it works. It might be acceptable temporary solution for the issue to use function symb(x) that works like a macro, returning expanded x. Best regards. Edited by user 21 September 2016 21:57:06(UTC)
| Reason: Not specified
|
|
|
|
|
|
Rank: Advanced Member Groups: Registered, Advanced Member Joined: 10/11/2010(UTC) Posts: 1,494 Was thanked: 1274 time(s) in 745 post(s)
|
The log file in the plugin folder shows details about what wrong here, I think I can improve function for support nested expressions. |
Russia ☭ forever
Viacheslav N. Mezentsev |
|
|
|
|
|
Rank: Guest
Groups: Registered
Joined: 04/07/2015(UTC) Posts: 6,866 Was thanked: 981 time(s) in 809 post(s)
|
Your proposal is short of instructions. The attached is 5346. As instructed, it should work eternally as long as Smath can access Maple. The red and gray modules may be combined. Interesting to read your comment: works/does not work. Jean Maple coeffs NumDen.sm (24kb) downloaded 51 time(s).
|
|
|
|
|
|
Rank: Guest
Groups: Registered
Joined: 04/07/2015(UTC) Posts: 6,866 Was thanked: 981 time(s) in 809 post(s)
|
Igor, my friend: that's all what you need => the companion codes. If it does not work with your Smath version, some fix is needed. Jean  Maple coeffs NumDen [Companion].sm (13kb) downloaded 47 time(s).
|
|
|
|
|
|
 Rank: Advanced Member Groups: Registered
Joined: 01/08/2010(UTC) Posts: 115  Location: Rome Was thanked: 13 time(s) in 13 post(s)
|
Hi Uni
I am trying to use the Maple Wrapper and I am testing the example file you initially posted to explain how to use it.
The problem is that I have as a result on each example the sta ring "empty" . Probably this is due to the fact that I am using Smath Studio on windows 7 64 bit and the extension doesn't work on 64 bit OS.
Is there any way to workaround this issue?
Thanks in advance for your help and best regards
Franco
|
|
|
|
|
|
Rank: Advanced Member Groups: Registered
Joined: 23/03/2016(UTC) Posts: 276 Was thanked: 91 time(s) in 57 post(s)
|
Franco,
Do you have an example of what you're trying to do? I use the Maple in Win7 x64 with no issue. I have had that error before and it's usually do to user error on my part. |
|
|
|
|
|
|
Rank: Advanced Member Groups: Registered, Advanced Member Joined: 10/11/2010(UTC) Posts: 1,494 Was thanked: 1274 time(s) in 745 post(s)
|
Originally Posted by: frapuano Hi Uni
I am trying to use the Maple Wrapper and I am testing the example file you initially posted to explain how to use it.
The problem is that I have as a result on each example the sta ring "empty" . Probably this is due to the fact that I am using Smath Studio on windows 7 64 bit and the extension doesn't work on 64 bit OS.
Is there any way to workaround this issue?
Thanks in advance for your help and best regards
Franco I need more info: - SMath Studio version; - MapleWrapper version; - contents of the log file after the calculations ({plugins}\32dfd679-8cfd-483a-b79a-19d5ea838750\x.x.x.x\log.txt). |
Russia ☭ forever
Viacheslav N. Mezentsev |
|
|
|
|
|
Rank: Advanced Member Groups: Registered
Joined: 01/08/2010(UTC) Posts: 115 Location: Rome Was thanked: 13 time(s) in 13 post(s)
|
Hi Uni herewith my answers. - SMath Studio version -> 98.6096 - MapleWrapper version;  - contents of the log file after the calculations ({plugins}\32dfd679-8cfd-483a-b79a-19d5ea838750\x.x.x.x\log.txt). log.txt (172kb) downloaded 35 time(s).and an example of the output I receive  Thanks in advance for your help and best regards Franco
|
|
|
|
|
|
Rank: Advanced Member Groups: Registered, Advanced Member Joined: 10/11/2010(UTC) Posts: 1,494 Was thanked: 1274 time(s) in 745 post(s)
|
Updated. Please do these steps again and show me log.txt. You can use "maple(sin(x))=" as a test example. |
Russia ☭ forever
Viacheslav N. Mezentsev |
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
